Z Configurations; Figure 5-17. Z1200 System - adept technology Python User Manual

Chapter 5 - Module System Descriptions

Z Configurations

In the Z configuration, the first axis is parallel to the work surface and rotated 90 degrees
so that the second axis is perpendicular to the work surface. The second axis' slide is
attached to the first axis' slide such that the entire axis moves up and down in a vertical 'Z'
motion (perpendicular to the work surface).
Available in the following configurations:
• Z1200
• Z2300
82
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Z-Axis
Motion

Figure 5-17. Z1200 System

Adept Python Modules User's Guide, Rev. E
X-Axis
Motion