11.5 Python Module Maintenance; 11.6 Additional Maintenance; 11.7 Mb-10 Decommissioning - adept technology Python User Manual

15. The final step is to use the Linear Module Calibration Setup function in the
DC_Setup program to recalibrate the axis that had the new battery installed. See
Section 10.4 on page 145

11.5 Python Module Maintenance

The ball screw, linear rail bearings, and ball bearings used in the Python linear modules
are lubricated for life. The ball screw nut and linear rail bearings are fully sealed to retain
the factory lubrication.

11.6 Additional Maintenance

Refer to the Adept SmartController User's Guide
for the Front Panel High Power Indicator.

11.7 MB-10 Decommissioning

Contact Adept Customer Service to determine when the MB-10 unit must be
decommissioned, or removed from service. If it is determined that the MB-10 is no longer
usable, then it must be disposed of according to all local and national regulations
regarding electronic components.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
for information on software configuration.
CAUTION: Adding additional grease or oil to the ball
screw shaft on the linear rails could damage these seals
and reduce the life of the module.
Adept Python Modules User's Guide, Rev. E
Python Module Maintenance
for information on changing the lamp
159