Python Linear Module Descriptions; Adept Python Linear Modules; Single-Axis And Multiple-Axis Configurations; Linear Module Options - adept technology Python User Manual

Python Linear Module
3.1

Adept Python Linear Modules

Use the Adept 3D Linear Modules Builder section of the Adept website (www.adept.com)
to select, configure, and request a quote for your linear modules. The website and this
chapter provide detailed information about Adept Python linear modules. See
for information about the Adept Python Theta modules.

Single-Axis and Multiple-Axis Configurations

You can order an Adept Python linear module system consisting of a single module,
MB-10 amplifier, and a SmartController CX. Or, multiple modules can be assembled into a
multi-axis system. For systems with an extended-reach Y-axis, or extended payloads, a
gantry support module is also available.
3.2

Linear Module Options

The following are configurable for each linear module:
• L-Series module type - L18, L12, and L08
• Stroke lengths - 100 and 200 mm increments standard
• Ball screw lead - 5, 10, and 20 mm leads standard
• Fail-safe brakes
• Motor mount orientation - in-line, side-, or bottom--mounted
• Harness exit configuration - left or right side
• Module preparation (assembly) - standard or cleanroom
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Descriptions
Adept Python Modules User's Guide, Rev. E
3
Chapter 4
37