Connecting Monitoring Cable From Fe Port; Connections Verification - Huawei NetCol5000-A035 User Manual

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width)

3.11.7 Connecting Monitoring Cable from FE Port

When remote upgrade is needed, connect one end of the monitoring cable
(standard network cable, prepared by yourself) to the FE port in the display panel,
as shown in
Figure 3-53 Connecting monitoring cable

3.12 Connections Verification

Table
Table 3-18 Check items on the indoor unit
Check Item
Cabinet
Electric heater
EC fan
Issue 17 (2020-10-22)
Figure 3-53. Connect the other end to the monitoring device.
3-18, Table 3-19, and
Expected Result
The cabinet is installed properly, without
any tilts.
The cabinet is secured to the base by using
bolts.
The foreign matter inside the cabinet such
as cable ties and stubs is cleaned up.
The electric heater is secured.
The electric heater probe is secured.
The fan is secured.
The fan has no foreign matter inside.
The fan blades rotate properly.
Copyright © Huawei Technologies Co., Ltd.
Table 3-20 list the items for connections verification.
3 Installation Guide
Actual Result
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
□Passed.
□Failed.
82