Faq; How To Perform Quick Settings; How To Set The Language, Date, Or Time - Huawei NetCol5000-A035 User Manual

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width)

4.7 FAQ

4.7.1 How to Perform Quick Settings

Context
●
●
Procedure
Step 1 Choose Settings > Quick Settings on the home screen. The quick settings screen
is displayed, as shown by (1), (2), (3) and (4) in
----End

4.7.2 How to Set the Language, Date, or Time

Context
●
●
Issue 17 (2020-10-22)
Figure 4-38 Confirming to calibrate the screen
c. Wait for 10 seconds or tap Yes.
When Figure 4-37
d. Flip toggle switch 1 for the LCD to ON, and others to the opposite
position.
NO TE
You need to manually operate the operation again from
calibration function after the calibration failure.
On the quick settings screen, you can set the language, time, date, and
system.
The Guest user can perform quick settings only during the initial power-on. If
you need to perform quick settings in other scenarios, log in as the Admin,
Engineer, or Operator user.
Enter the User Settings screen to set the Language, Date, or Time. You can
also set Time zone, Password, LCD contrast, LCD saturation, and LCD
brightness on the screen.
To set the preceding parameters, log in as the Admin, Engineer, or Operator
user.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-36
is displayed, the adjustment is complete.
Figure
4 ACC Introduction
is displayed. Tap the screen.
a to trigger the touchscreen
4-5.
122