Connecting The Signal Cable To The Hwa Cable Terminal - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 3-54 Removing the protective device for the lamp
----End

3.7.2 Connecting the signal cable to the HWA cable terminal

Prerequisites
Before connecting the NetCol8000-A100 signal cable between the high water level detection
switch and the HWA cable terminal, by referring to
from the Infrared Humidifier Lamp
high water level detection switch from the infrared humidifier lamp firstly.
Procedure
Step 1 Connect the signal cable to the HWA cable terminal routed over the high level detection
switch through cable holes. Then arrange cables and bind them on the fix base of cable ties.
Issue 10 (2019-01-15)
Only NetCol8000-A100 needs to be connected onsite, NetCol8000-A050 has been connected before
delivery.
Copyright © Huawei Technologies Co., Ltd.
3.7.1 Removing the Protective Device
to remove the protective device and the signal cable to the
3 Installation Guide
70