Huawei NetCol5000-A035 User Manual page 131

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width)
Procedure
●
Figure 4-36 Screen calibration page
Figure 4-37 Screen displayed when the calibration is complete
●
Issue 17 (2020-10-22)
When calibrating the screen by tapping the screen, tap Maint > Screen Calib
to enter the following screen, as shown in
displayed when the screen calibration is complete.
Calibrating the screen by DIP switch.
a. Flip toggle switch 1 for the LCD to ON, and others to the opposite
position, and wait for 3 seconds before calibrating.
toggle switches for the screen.
b. Flip the fourth toggle switch to ON and others remain unchanged, the
screen calibration function is triggered.
After 15 seconds, a dialog box indicating Are you sure you want to
calibrate the screen? If you do not click Yes or No, calibration will
start automatically 10 seconds later. is displayed, as shown in
4-38.
Copyright © Huawei Technologies Co., Ltd.
4 ACC Introduction
Figure 4-36. Figure 4-37
Figure 4-2
is
shows the
Figure
121