Huawei NetCol5000-A035 User Manual page 108

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width)
Procedure
Step 1 On the home screen, tap
Figure 4-11
Figure 4-11 Teamwork settings screen
Step 2 Set teamwork control parameters.
You can set all the teamwork control parameters on the master smart cooling
product but only Teamwork group no., Teamwork unit address, and Teamwork
function on a slave smart cooling product.
parameters.
Table 4-6 Teamwork settings
Paramete
r
Teamwork
group no.
Teamwork
unit
address
Teamwork
function
Issue 17 (2020-10-22)
> Teamwork Settings. The screen as shown in
is displayed.
Description
The number of the
teamwork controlled
group, which is the same
for all the devices in the
group
Only one device in each
group can be set to 1.
Other device addresses
should be different from
each other.
Disable or enable the
teamwork function. If the
teamwork function is
disabled, this device is
operating according to its
own control If the
teamwork function is
enabled, this device works
in harmony with others
that in the same group.
Copyright © Huawei Technologies Co., Ltd.
Table 4-6 describes how to set the
Configuration Principle
Set the assigned
teamwork control
number.
Set the assigned unit
address.
Set this parameter based
on the onsite device
heat distribution.
4 ACC Introduction
Default
Value
1
NA
Disable
98