Receipt And Storage - WEG CFW11W G2 Series User Manual

General Information
E.g.: CFW11WG21482T6OYZ corresponds to a CFW11W G2 three-phase inverter of 1482 A, with input supply
voltage from 500 V to 690 V, with optional safety stop. The options for the inverter rated current under normal
duty (ND) are in Table 2.2 on page
2

2.7 RECEIPT AND STORAGE

The power units of the CFW11W G2 are supplied in a wooden box.
The control units of the CFW11W G2 are supplied in a cardboard box.
There is an identification label affixed to the outside of the package, identical to the label affixed to the side of the
inverter.
In order to open the package:
1. Remove the front cover of the package.
2. Remove the styrofoam protection.
Check if:
1. The nameplates correspond to the models purchased.
2. There were any damages during transportation.
Report any damage immediately to the carrier.
If the products are not immediately installed, store them in a clean and dry location (temperature between -25 ºC
and 60 ºC), with a cover to prevent the ingress of dust.
2-10 | CFW-11W G2
2-10, according to the inverter rated output voltage.
Table 2.2: Rated currents under normal duty (ND)
500-690 V
0780 = 780 A
1482 = 1482 A
2223 = 2223 A
2964 = 2964 A
3705 = 3705 A
Figure 2.8: Do not tilt the power units