Lifting; Panel Mounting Of The Up11W G2 - WEG CFW11W G2 Series User Manual

Installation and Connection
The panel builder must provide the other parts of the drive. Among those parts are the rectifier, power busbar,
pre-charge circuit, panel fans, protection fuses and input reactance.

3.1.3 Lifting

3
Figure 3.1 on page 3-2

3.1.4 Panel Mounting of the UP11W G2

In order to install the UP11W G2 in panels, the following mounting accessories are necessary:
Rack 2 G2 allows the mounting of 1 or 2 modules side by side in 600 mm wide panels.
„
Rack 3 G2 allows the mounting of 1, 2 or 3 modules side by side in 800 mm wide panels.
„
3-2 | CFW-11W G2
Table 3.2: Cable set items
WEG Item
13555095
13555150
13555151
shows the position of the lifting lugs.
Front view
Figure 3.1: UP11W G2 lifting lugs
Cable Set
2.5 m Cables
3.0 m Cables
3.6 m Cables
Lifting lugs
Back view