WEG CFW11W G2 Series User Manual page 39

Installation and Connection
DC- DC+
3
Figure 3.26: DC power supply terminals
DC+: Positive pole of the DC power supply.
DC-: Negative pole of the DC power supply.
The U, V and W connections are made through 12 screws M12X25 (recommended torque: 60 N.m; see Figure
3.27 on page 3-23).
Two screws M12X25 (recommended torque: 60 N.m) are used to fasten the grounding cable of the UP11W G2.
3-22 | CFW-11W G2