Installing The Gpu Air Shroud - Dell EMC PowerEdge R840 Installation And Service Manual

Installing the GPU air shroud

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
Steps
1 Align the tabs on the air shroud with the slots on the system.
Figure 19. Installing the GPU air shroud
2 Lower the air shroud into the system until it is firmly seated.
3 Install the expansion card riser 1 and
4 If applicable, install the NVDIMM-N
5 Holding the blue touch point on the air shroud cover, incline the cover at an angle, and then push it down until it is firmly seated.
50 Installing and removing system components
Safety instructions.
Before working inside your
2.
battery.
system.