Installing A Gpu - Dell EMC PowerEdge R740xd Installation And Service Manual

Installing a GPU

Prerequisites
1. Follow the safety guidelines listed in
2. Remove the air shroud.
3. Remove the heat sink.
4. Remove the cooling fans
5. Unpack the GPU cards and the GPU kit.
6. Install the heat sink from the kit.
7. Install the risers.
8. Install the GPU air shroud on the system.
Figure 106. Installing GPU air shroud
9. Press the blue tabs on either sides of the shroud and remove the top cover of the shroud.
Safety instructions.
and replace them with Install the cooling fans.
Installing and removing system components 157