10
Underbody cladding
10.1
Tools
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783-
10.2
Assembly overview - underbody cladding
1 - Left cover
❑ Removing:
–
Unscrew bolts -9-
2 - Underbody cladding
❑ Left and right
❑ Removing:
–
Remove hexagonal
nuts -3-.
3 - Rear left underbody cover
❑ Removing:
–
Unscrew bolts -5-
4 - Left sill panelling
5 - Bolt
❑ Qty. 5 for rear left under‐
body cladding
❑ Qty. 4 for rear right un‐
derbody cladding
❑ Specified torque: 2 Nm
6 - Right sill panelling
7 - Rear right underbody clad‐
ding
❑ Removing:
–
Unscrew bolts -5-
8 - Hexagon nut
❑ Qty. 8 on each side
❑ Specified torque: 6 Nm
9 - Bolt
❑ Qty. 2 on each side
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
431
10. Underbody cladding