Volkswagen Passat 2011 Workshop Manual page 101

1 - Door
❑ Removing and installing
⇒ page 93
❑ Adjusting ⇒ page 95
2 - Door handle with base
❑ Removing and installing
⇒ page 107
❑ Remove door handle
with access and start
authorisation
⇒ page 108
3 - Lock cylinder housing
❑ Removing and installing
⇒ page 106
4 - Door lock
❑ The door lock can be re‐
moved only together
with the assembly carri‐
er.
❑ Removing and installing
⇒ page 110
5 - Subframe
❑ Removing and installing
⇒ page 98
6 - Multi-point socket head bolt
❑ Different torque specifi‐
cations
❑ Specified torque to
1
body: 20 Nm + / 4 turn
(90°) further
❑ Specified torque to
door: (50 Nm)
❑ Always renew bolts after
loosening.
7 - Door hinge
❑ Lower part is secured to upper part of hinge with bolt -8-.
❑ The hinge is split.
8 - Bolt
❑ This bolt must be removed to remove door from hinge.
❑ 28 Nm
9 - Door hinge
❑ Upper part is secured to lower part of hinge with bolt -8-.
❑ The hinge is split.
10 - Door hinge
❑ Lower part is secured to upper part of hinge with bolt -12-.
❑ The hinge is split.
11 - Door hinge
❑ Upper part is secured to lower part of hinge with bolt -12-.
❑ The hinge is split.
12 - Bolt
❑ This bolt must be removed to remove door from hinge.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
91
1. Rear door