Volkswagen Passat 2011 Workshop Manual page 324

Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
Instructions and work specifications for the Park Assist system
can be found in ⇒ Electrical system; Rep. gr. 94 ; Park Assist
system (PA)
Installing
– Connect connectors to installed electrical components.
– Locate rear bumper cover -1- on vehicle in parallel movement.
– Press rear bumper cover -1- onto guides on left and right on
side panel until they engage with each other.
– Ensure joints are parallel and shut lines are equal ⇒ Body Re‐
pairs; Rep. gr. 00 ; Body gaps; Body, rear .
– Start bolts -2-, -3- -4- and -6- and tighten them to respective
specified torque ⇒ page 310
– Clip expanding rivet -5- in place on left and right.
– Remove tail lights in side panel ⇒ Electrical system; Rep. gr.
94 ; Tail lights; Removing and installing tail light .
314
Rep. gr.63 - Bumpers
.