Removing And Installing Window Channel Trim Strip - Volkswagen Passat 2011 Workshop Manual

– Pull window channel equally all around -arrows a and b- off
door flange.
– To do this, start at fixed window -arrow a-.
– Pull out window channel, including fixed window, from door
upwards at an angle -arrows c-.
3.5.3 Installing
Installation is carried out in the reverse order of removal.
Specified torque for bolts -2-: 2 Nm
• Carry out functional test function before installing door trim.
Note
Ensure window channel is seated evenly when installing (wind
noises).
3.6 Removing and installing window chan‐
nel trim strip
3.6.1 Removing
– Remove window channel trim
– Push window channel in top front area -2- to side slightly.
– Remove clip -3-.
General body repairs, exterior - Edition 06.2019
⇒ page 357 .
Passat 2011 ➤ , Passat Variant 2011 ➤
3. Rear door window (saloon)
363