Volkswagen Passat 2011 Workshop Manual page 19

– Move to service position
– When electrically disconnecting front airbag crash sensor for
driver side if there is one, proceed as described under ⇒ Gen‐
eral body repairs, interior; Rep. gr. 69 ; Crash sensors; Re‐
moving and installing front airbag crash sensor for driver side
- G283- .
– Disconnect any other electrical connectors.
– Drain coolant and disconnect coolant lines ⇒ Rep. gr. 19 ;
Parts of the cooling system; Draining and filling coolant .
– Disconnect coolant lines for condenser ⇒ Heating, air condi‐
tioning; Rep. gr. 87 ; Repairs to the refrigerant circuit which
must only be carried out by suitable workshops with expert
mechanics; Removing and installing condenser .
– Together with a second mechanic, unscrew guide pins -
T10093- from left and right longitudinal member -2- and lift out
lock carrier with add-on parts -1-.
WARNING
Do not start the engine if the air conditioning system and/or the
coolant system lines are disconnected.
⇒ page 3 .
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
9
1. Lock carrier