Volkswagen Passat 2011 Workshop Manual page 307

1 - Rear bumper cover
❑ Material PP/EPDM.
❑ Removing and installing
2 - Bolt
❑ Qty. 2
❑ Specified torque: 2.0 ±
0.5 Nm
3 - Bolt
❑ Qty. 3 on each side
❑ Specified torque: 2.0 ±
0.5 Nm
4 - Bolt
❑ Qty. 4 on each side
❑ Specified torque: 2.0 ±
0.5 Nm
❑ Bolted to wheel housing
liner
5 - Spreader rivet
❑ Left and right
6 - Bolt
❑ Qty. 2 on each side
❑ Specified torque: 2.0 ±
0.5 Nm
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
2. Rear bumper cover (saloon)
297