Volkswagen Passat 2011 Workshop Manual page 132

Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
2.14.2 Installing
– Remove existing adhesive residues with erasure disc of ad‐
hesive strip remover - VAS 6349- .
– Immediately before bonding door outer seal, clean bonding
surface thoroughly with adhesive remover D 002 000 10.
• Bonding surfaces must be free of dust and grease and there
should be no adhesive residues.
– Vulcanised point -arrow- of door outer seal must be in centre
area of door sill panel.
– Pull off protective foil and install seal on door. Do not pull door
outer seal excessively to avoid stretching seal.
122
Rep. gr.57 - Front doors, door components, central locking