Volkswagen Passat 2011 Workshop Manual page 379

4.3.4 Installing front trim
– Check spring clips -5- and seal -4- are complete and not dam‐
aged. Renew parts as necessary.
– Push trim panel -1- in -direction of arrow- on window frame.
– Tighten bolts -2-, tightening torque: 2 Nm.
– Install window channel -6- in mounting.
– Press window channel seal -3- equally on flange.
4.3.5 Removing rear trim
• Window slot trim is removed.
– Pull window channel -3- out of window strut -arrow a-.
– Unscrew bolts -2- and pull off trim -1- in direction of C-pillar
-arrows b-.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
4. Rear door window (estate)
369