5.6
Assembly overview - rear lid trim strip,
saloon
Special tools and workshop equipment required
♦ Roller - T10314-
1 - Rear lid (saloon)
2 - Trim strip
❑ Glued
❑ Removing:
–
Lightly heat trim strip
with hot air blower -
V.A.G 1416- and pull it
off rear lid carefully.
❑ Installing:
Note
Ensure that the adhe
♦
ces are free of dust a
Glue on roof trim strip
♦
ately after cleaning.
Remove protective fo
♦
strip immediately bef
The working tempera
♦
be approx. 21°C.
–
Remove existing adhe‐
sive residues with adhe‐
sive remains remover -
VAS 6349- .
–
Immediately before fit‐
ting trim strip, clean
bonding surface thor‐
oughly with adhesive re‐
mover - D 002 000 10- .
–
Centre trim strip on rear
lid and press on.
–
Press trim strip firmly
onto rear lid with roller - T10314- .
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
417
5. Mouldings and trims