Removing And Installing Tilting Mechanism And Front Glass Panel Cable - Volkswagen Passat 2011 Workshop Manual

3.22 Removing and installing tilting mecha‐
nism and front glass panel cable
3.22.1 Removing
– Remove front glass panel
– Remove rear glass panel
– Remove assembly frame from vehicle
– Remove sliding roof motor
– Remove rear section from assembly frame
After removal of rear part, tilting mechanism can be slid out back‐
wards.
– Push glass panel tilting mechanism only by indicated position
-arrow b- on slider -2-, not by guide plate -1-.
⇒ page 215 .
⇒ page 219 .
⇒ page 255
⇒ page 235 .
⇒ page 258
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
.
.
3. Panorama sliding sunroof (Arvin-Meritor)
265