– Remove front bumper cover
– Detach Bowden cable at Bowden cable coupling
⇒ page 33
.
– If vehicle has charge air cooler, disconnect pressure hoses
with plug-in connectors
– If vehicle has charge air cooler, disconnect pressure hoses
with hose clips
⇒ page 6
– Only remove one bolt -2- on left and right side of each longi‐
tudinal member.
– Attach special tool guide pins - T 10093- to left and right lon‐
gitudinal members where these bolts were located.
– Remove remaining bolts -2- on left and right side of longitudi‐
nal members.
– Remove bolts -3- on left and right at top.
– The lock carrier with add-on parts -1- can be pulled forwards
-arrows- about 10 cm on the special tool guide pins - T 10093- .
When doing this, be careful with the electrical wires/cables
leading to lock carrier and, if necessary, detach connectors.
⇒ page 280
.
⇒ page 6
.
.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
5
1. Lock carrier