Managing Seca Patient Files; Creating A Seca Patient File - Seca mVSA 535 Instructions For Use Manual

Idle time button
Shut down
20 minutes

6.2 Managing seca patient files

Creating a seca patient file

44 • /
seca mVSA 535 seca mBCA 525
Device characteristics
• Power supply operation:
- The charging process for the rechargeable batteries for
the device and the measuring mat – if the measuring mat
is present – starts automatically
- When the charging process is complete: Device shuts
down and switches off
• Rechargeable battery operation:
- Device shuts down
- The device switches off
NOTE
If rechargeable battery charge status undershoots a preset limit value
[%], the device shuts down and switches off. It behaves in this way
regardless of the option you select in the Save energy dialog. The
limit value for rechargeable battery charge status is specified by your
administrator: ➔
➔
Creating a seca patient file
➔
Calling up a seca patient file
➔
Editing a seca patient file
➔
Exporting a seca patient file
➔
Deleting a seca patient file
NOTICE!
Inconsistent measuring results
If you create seca patient files several times, this can lead to incorrect
assignment of measuring results and falsify the analysis.
► If there is no seca patient file on the device for a patient, check
whether there is already a seca patient file in the
PC software.
► If a seca patient file for this patient exists in the
PC software, check the synchronization settings ➔
automatic
► Only create a new seca patient file on the device if you are sure that
there is no seca patient file for the patient in the
PC software.
1. Log in ➔
Logging
2. Press the Patient tab.
The patient list is displayed.
Power management.
synchronization.
in.
To remove setting
Press the ON/OFF
button
seca analytics 115
seca analytics 115
Activating
seca analytics 115