Seca mVSA 535 Instructions For Use Manual page 78

78 • /
seca mVSA 535 seca mBCA 525
6. Use the keypad of the measuring mat for the following steps:
a) Enter patient position: Press the relevant position button
b) Press the
7. Observe measuring progress on the measuring mat:
Measurement progress
1. • Patient position is given
• Electrodes being tested
2. • Measurement in progress
• Measuring results will be stored
on the measuring mat
3. Measurement end: Measuring
results are stored on the
measuring mat, waiting for
transmission to the monitor
8. Remove the electrode cables from the electrodes.
9. Remove the electrodes from the patient.
10. Suspend the measuring mat in the magnetic catch of the monitor
➔
Suspending the measuring mat in the magnetic
The updated seca patient file is transmitted to the monitor.
The measurement procedure is complete when the Measurement
successful message appears.
You have the following options for continuing:
► Press the
► Press the
► Press the Analysis tab: ➔
► Press the Vital signs tab: ➔
► Press the
button: Start the measurement procedure
Measuring mat
Electrodes
On
Flashing
Off
button: Add comment
button: Save measurement
Analyzing measurement
Measuring vital signs
button: Discard measurement
Position
button
On
On
Flashing
catch.