5.2 Managing seca measuring devices
Preparing a seca measuring device
➔
Preparing a seca measuring device
➔
Adding a seca measuring device
➔
Changing a setting of a seca measuring device
➔
Exporting the device list
➔
Deleting a device
Presets need to be defined on the seca measuring device to ensure reliable
system function.
NOTICE!
Malfunction and incorrect data allocation
Incorrect or incomplete settings on seca measuring devices can lead
to the transmission of invalid measured values, incorrect allocation of
measured values, or malfunctions in the system or in individual
measuring devices.
► Ensure that all seca measuring devices to be connected are
correctly configured.
► Follow the instructions for use for the respective seca measuring
device.
1. Make the following settings on the seca measuring device:
Function
Autohold
a
seca 360° wireless
a. For the seca 285/seca 284 measuring stations, this function must re-
main activated to be able to transmit length measured values from the
head slide to the multi-functional display.
2. Ensure that the seca measuring device is
devices:
• Stadiometer:
seca 274
• Wireless printer:
seca 465
• Wireless printer from third parties
3. Continue based on the type of seca measuring device (➔
seca measuring
devices):
► Devices with an internal interface module, for example:
continue with section ➔
► Device requires
➔
Connecting and installing the seca 452 interface module
Setting
On
Off
not
connected to the following
,
seca 264
,
,
seca 466
seca 467
Adding a seca measuring device
interface module: continue with section
seca 452
Operating seca connect 103 • 31
English
Device type
All
seca 360° wireless
measuring devices
Compatible
:
seca 336 i