Seca mVSA 535 Instructions For Use Manual page 57

NOTE
You can only perform a further temperature measurement if you dis-
card the probe cover and push the temperature probe back into the
probe holder completely.
5. Push the temperature probe into the probe holder completely.
You have the following options for continuing:
► Measure further vital signs ➔
► Measure bioimpedance ➔
► Stop the measurement procedure ➔
procedure
Modifying presets
NOTE
Your settings apply to the current measurement procedure. If you
stop the measurement procedure ➔
dure, the presets defined by the administrator become active again.
1. Ensure that the temperature probe is pushed into the probe holder
completely.
2. Press the TEMP field.
The Temperature settings dialog window opens.
The presets are displayed.
3. Press the desired measurement method.
• Predictive
• Direct
4. Press the desired measuring position.
• Oral
• Axillary
5. Press the Confirm button.
The dialog window closes.
Changed settings are adopted for the current measurement.
6. Perform a temperature measurement as described in the section entitled
➔
Starting an oral/axillary temperature
=>
Measuring vital signs
Measuring bioimpedance
Stopping a measurement
Stopping a measurement proce-
measurement.
Operation • 57
English