Setting Up Automatic Export - Seca mVSA 535 Instructions For Use Manual

Setting up automatic export

This function allows you to transmit measuring results to an EMR system
automatically. The export takes place as soon as data are generated or
amended on the device. To be able to use this function, an interface to the
PC software must be set up in your EMR system.
seca analytics 115
1. Establish which data format your EMR system accepts.
2. Press the Peripherals tab.
3. Press the seca connect button.
4. In the Connect Mode drop-down menu, select the option
seca analytics 115 TCP or seca analytics 115 UDP.
5. Press the button.
The seca analytics 115 configuration page is displayed.
6. Ensure that the Automatic synchronisation checkbox is activated.
7. Press the desired export format.
• Automatic export (CSV)
• Automatic export (EMR)
8. To adopt the settings, proceed as follows:
a) Press the
b) Press the
The settings are adopted.
9. Set up an interface to the
system.
button
button
seca analytics 115 PC software in your EMR
Setting up peripherals • 177
English