Connecting The In-Ear Thermometer; Connecting The Seca Spo; Sensor - Seca mVSA 535 Instructions For Use Manual

Connecting the in-ear thermometer

Connecting the seca SpO

NOTICE!
Damage to device, malfunction
The temperature probe can only be pushed right into the probe holder
if it does not have a probe cover on.
► Ensure that there is no probe cover on the temperature probe.
NOTE
The storage compartment on the probe connection provides space
for two packs of probe covers.
1. Put the connector for the in-ear thermometer in the socket on the Smart-
Bucket until you feel the connector engage.
NOTE
The magazine holder in the thermometer compartment provides
space for two probe cover magazines.
2. Place the in-ear thermometer in the thermometer compartment as shown
in the illustration below.

sensor

NOTICE!
2
Damage to device, malfunction
The SpO
equipment fitted.
► Ensure that the SpO
► Follow the user documentation from the sensor manufacturer.
1. If necessary, connect a patient cable to the SpO
the user documentation from the sensor manufacturer.
=>
=>
sensor must be compatible with the seca SpO
2
sensor is compatible with the SpO
2
equipment fitted in your device ➔
parts.
English
=>
Press!
measuring
2
measuring
2
Optional accessories and spare
sensor as described in
2
Starting up the device • 35