Connecting the blood pressure cuff
Connecting the temperature probe
34 •
/
seca mVSA 535
seca mBCA 525
1. Connect the tube coupling for the blood pressure cuff to the compressed
air connection of the device until you hear the tube coupling engage.
=>
2. Stow the blood pressure cuff in the SmartBucketas shown in the
illustration below.
1. Open the cover cap of the connection compartment.
2. Insert the connector for the temperature probe in the probe connection
completely as shown in the illustration below.
3. Close the cover cap of the connection compartment.
Press!
4. Push the temperature probe into the probe holder completely as shown in
the illustration below.
=>
=>
Click!
=>
=>
=>
Click!