Setting The Date And Time - Seca mVSA 535 Instructions For Use Manual

5.5 Setting the date and time

When you start up the device for the first time, you first need to set date and
time.
1. Ensure that the measuring mat – if the measuring mat is present– is cor-
rectly suspended in the magnetic catch of the monitor ➔
measuring mat in the magnetic
2. Connect the device to the power supply.
3. Press the ON/OFF button of the monitor.
The LED of the button is white.
The initial start screen appears.
4. Enter the current date:
a) Press the
b) Use the keypad
c) Press the
5. Enter the current time:
a) Press the
b) Use the keypad
c) Press the
6. Press the
7. Continue operating the device – you have the following options:
► Leave device switched on (recommended): ➔
rechargeable batteries
► Perform measurements using the power supply: ➔
► Configure device using the power supply: ➔
Configuring seca mVSA 535 /seca mBCA 525
catch.
input field
: Enter current date
button: Confirm entry
input field
: Enter current time
button: Confirm entry
button.
Starting up the device • 39
English
Suspending the
Charging
Operation
For administrators: