Seca mVSA 535 Instructions For Use Manual page 63

4. Pick up a probe cover:
a) Push the measuring head firmly into a probe cover in the magazine
b) Ensure that the probe cover engages audibly with the measuring
head
c) Remove the probe cover and thermometer from the magazine
d) Ensure that the probe cover is undamaged
Click!
The system is ready to measure when the displays of both the monitor
and the in-ear thermometer are showing dashes, the current measuring
position and the thermometer icon as shown in the illustration below.
5. Introduce the measuring head into the patient's auditory canal as shown
in the illustration.
6. Measure the patient's temperature:
a) Press the
b) Wait until you hear a triple acoustic signal
c) Take the measuring head out of the patient's ear
The monitor displays the temperature value.
The in-ear thermometer display likewise shows the temperature value and
the Discard probe cover symbol.
The temperature value is displayed on the monitor until you stop the
measurement procedure ➔
NOTE
The monitor always displays measured values in the unit set on the
monitor. If required, the values submitted by the in-ear thermometer
are converted automatically.
button on the in-ear thermometer
Stopping a measurement
English
procedure.
Operation • 63