Seca mVSA 535 Instructions For Use Manual page 67

Modifying presets (seca measuring equipment only)
NOTE
These settings apply to the current measurement procedure. If you
stop the measurement procedure ➔
dure, the presets defined by the administrator become active again.
1. Ensure that neither the blood pressure cuff nor the SpO
applied.
2. Press the PR field.
The PR settings dialog window opens.
The preset is displayed (in this case: Standard).
3. Press the desired measuring mode:
seca measuring equipment
Mode
Standard
Sensitive
4. Press the Confirm button.
The dialog window closes.
Changed settings are adopted for the current measurement.
5. Start a blood pressure measurement or an SpO
described in the sections entitled ➔
and ➔
measurement Starting an SpO
Stopping a measurement proce-
Measuring range Motion tolerance
0 - 240 min
-1
20 - 300 min
-1
measurement as
2
Preparing the blood pressure
measurement.
2
English
sensor are
2
High
Low
Operation • 67