Network Connection - Seca mVSA 535 Instructions For Use Manual

11.5 Network connection

Fault
No WiFi connection
No network connection
116 • /
seca mVSA 535 seca mBCA 525
Cause
WiFi function of device is deactivated
Distance between monitor and WiFi
router is too big
WiFi not available in your institution
Firewall: ports required are not enabled
Firewall/gateway configuration does
not permit use of LAN and WiFi in
parallel
Remedy
Administrator:
Activate WiFi
• Reduce distance
• Transmit measuring results to
PC software or
seca analytics 115
via LAN
seca connect 103
Transmit measuring results to
PC software or
seca analytics 115
via LAN
seca connect 103
Administrator:
Enable required ports in firewall ➔
interfaces and network ports
Administrator:
Deactivate one of the two transmission
options on the device.
Monitor