Making Workflow Settings - Seca mVSA 535 Instructions For Use Manual

Making workflow settings

3. In the Connect Mode drop-down menu, select the option
.
seca connect 103
4. Enter the connection data for the
► Enter the IP address of the server on which the
is installed
► Enter the port for the
You have the following options for continuing:
► Press the
► Press the
You can specify the following settings for the measuring sequence and
communication with the EMR system:
• Password settings for the user ID
• Scan sequence for user and patient ID
• Permit offline measurements if the EMR system connection is interrupt-
ed (recommended for mobile use or difficult WiFi reception conditions)
• Enter an organization ID – to assign the device to a department in your
institution, for example
1. Press the Peripherals tab.
2. Press the seca connect button.
3. Ensure that in the Connect Mode drop-down menu the option
is selected.
seca connect 103
seca connect 103
(recommended: 22020)
seca connect 103
button: ➔
Making workflow settings
button: Adopt settings
Connecting to an EMR system • 187
English
software:
seca connect 103