Table of Contents
Advertisement
Printing partial results
5.4 Assigning a measurement to a patient file
Checking data connection
Logging on to a seca patient
36 •
NOTICE!
Loss of data
If there is no new entry for approx. 5 minutes, the current measure-
ment is discarded. The complete measuring procedure will have to be
repeated.
You can print out the measured results so far. Proceed as described in the
section entitled "Printing results report" on page 44.
►
Ensure that you can access a seca patient database in one of the
following ways:
– the PC with the
– the USB memory stick with the seca patient database is connected
NOTE:
• If you have connected a USB memory stick containing a seca
patient database to the device, you will not be able to access the
seca 360°
or seca wireless network.
• If you are uncertain as to how a seca patient database can be
accessed, contact your administrator or hospital technician.
If you wish to search for or create seca patient files for the first time after
database
switching on the device, the device will require you to authenticate yourself
using your user PIN. For this purpose, proceed as outlined below.
1. Enter your user PIN using the numerical keypad.
NOTE:
If you do not have your user PIN to hand, or if you have questions
regarding access rights, contact your administrator or hospital
technician.
2. Press the Enter key on the numerical keypad.
The entry is accepted.
The device now accesses the seca patient database.
The login symbol is white. You are logged in to the seca patient database.
PC software is switched on and connected
seca 115
to the device via the
seca 360°
corresponding data connection symbol is white.
to the USB interface of the touchscreen display. The corresponding
data connection symbol is white.
patient database of the
wireless network or Ethernet. The
PC software via Ethernet
seca 115
Advertisement
Table of Contents
