6. CONNECTING TO AN EMR SYSTEM
6.1 Information about user and patient data
184 •
/
seca mVSA 535
seca mBCA 525
➔
Information about user and patient data
➔
Assigning a clear device name
➔
Setting up a connection to the seca connect 103 software
➔
Configuring data transfer to the EMR system
➔
Use of certificates
➔
Summary: Device characteristics when connected to EMR system
You can connect the device to compatible EMR systems via the
software.
seca connect 103
seca recommends performing this integration exclusively in collaboration with
seca Service and the manufacturer of your EMR system.
seca connect 103
The following functions are available when you connect to an EMR system:
• Log in to device with EMR user ID
• Call up EMR system patient data on the device
• Submit measuring results to the EMR system
Information about the measuring sequence when you connect to an EMR
system can be found here: ➔
When connecting to an EMR system, the following changes apply to the
management of user and patient data:
• User IDs for medical staff can only be set up in the EMR system.
• Patient files can only be managed in the EMR system.
• User IDs for administrators and service technicians can only be set up
on the device.
EMR system
LAN/WiFi
LAN/WiFi
seca mVSA 535
Operation when connected to an EMR
system.