Measuring Mat Controls (Bioimpedance Analysis) - Seca mVSA 535 Instructions For Use Manual

4.3 Measuring mat controls (bioimpedance analysis)

No.
A
LEDs, electrodes on left
Button with LED,
B
patient position left
C
Start button
D, K
Magnetic catch
Button with LED,
E
patient position right
F
LEDs, electrodes on right
G
LED, WiFi
H
LED, charge status
I
Electrode connections
J
Electrode cables
L
Infrared interface
Inductive charging interface
M
with magnetic catch
A
B
C
D
E
F
G H
Control
LED green: Electrode contact good
LED green, flashing: Measurement in progress
LED red: Electrode contact poor
Enter patient position
LED green: seca patient file loaded, patient position selected
LED green, flashing: Measurement stopped
LED red: No seca patient file loaded
Start measurement
Fold up measuring mat for transport/storage
Enter patient position
LED green: seca patient file loaded, patient position selected
LED green, flashing: Measurement stopped
LED red: No seca patient file loaded
LED green: Electrode contact good
LED green, flashing: Measurement in progress
LED red: Electrode contact poor
LED green: WiFi connection to monitor OK
LED green, flashing: WiFi connection being set up
LED red: No WiFi connection to monitor
LED off: WiFi deactivated
LED green: Rechargeable battery full
LED green, flashing: Rechargeable battery almost discharged, charge as
soon as possible
LED red: Rechargeable battery discharged
Connect to electrodes
Transmit signals from electrodes to the measuring mat
Automatic data transmission: Monitor/measuring mat
Alternative if no WiFi available
Charge measuring mat rechargeable battery
M
L
K
Function
English
J
I
Device overview • 19