Setting Up A Seca 360° Wireless Connection; Introduction - Seca mVSA 535 Instructions For Use Manual

5.5 Setting up a seca 360° wireless connection

Introduction

➔
Introduction
➔
Activating/deactivating the seca 360° wireless module
➔
Setting up a seca 360° wireless connection
If you use devices from the
a measuring station, you can connect them to the
seca mBCA 525 . You can submit the parameters height and weight directly
to the device and adopt them in a seca patient file.
On the seca mVSA 535 , the values also appear in the Vital signs tab.
1. Measure
1. Messen
2. Submit
2. Senden
Example display:
Beispiel-Darstellung:
seca 285
Messstation seca 285 mit seca mVSA 535
In order to be able to communicate with devices from the
system, the
seca 360° wireless
seca mBCA 525 must be activated and a wireless group set up.
NOTE
• The device can only receive data, not transmit it, via the
seca 360° wireless
• Follow the instructions in this section to achieve a stable connection
of the desired seca 360° wireless
undesired integration of other devices.
• You should also follow the instructions for use for the
seca 360° wireless
seca 360° wireless system in your institution, e.g.
seca mVSA 535
3. Receive
3. Empfangen
4. Adopt
4. Übernehmen
seca mVSA 535
measuring station with
module of the
seca mVSA 535
connection.
devices and to prevent the
system devices being used.
Setting up peripherals • 181
English
/
seca 360° wireless
/