Adding Weight And Height - Seca mVSA 535 Instructions For Use Manual

6.5 Adding weight and height

80 • /
seca mVSA 535 seca mBCA 525
➔
Receiving weight and height (seca 360° proximity)
➔
Receiving weight and height (seca 360° wireless)
➔
Entering weight and height manually
You can add the parameters weight
• In the Patient tab
• In the Vital signs tab
Your administrator can set up the device so that weight and height can be
received by compatible seca measuring devices:
► ➔
Receiving weight and height (seca 360° proximity)
► ➔
Receiving weight and height (seca 360° wireless)
NOTE
If you are uncertain of which options you can use, contact your
administrator.
You can also enter weight and height manually: ➔
manually.
and height as follows:
Entering weight and height