Accessing Xt Series Web Interface - Avaya Scopia XT7100 User Manual

5. Using the keypad, type the same number used in the Remote control code field.
When the code is not the default 01, the system displays the paired remote icon with its new
code at the top-right corner of the screen.
6. Select Finish in the web interface, or select OK on the endpoint.
Related Links
About the XT Remote Control Unit

Accessing XT Series Web Interface

About this task
This procedure describes how to access the Avaya Scopia
supports the following internet browsers:
• Internet Explorer version 8 or later
• Google Chrome version 11 or later
• Mozilla Firefox version 3.6 or later
• Apple Safari version 5 or later
• Opera version 11 or later
If you have a monitor, you can find the IP address at the top bar of the endpoint's monitor.
Before you begin
Web access is enabled by default. If it was disabled, you can enable it and configure the security
details as described in Deployment Guide for Avaya Scopia
April 2015
Figure 13: Setting the code on the XT Remote Control Unit
on page 20
Comments? infodev@avaya.com
Controlling the XT Series
®
XT Series web interface, which
®
XT Series.
®
Avaya Scopia XT Series User Guide
23