Honeywell Enraf 1010 CB Programming Manual page 96

Mini-Pak An automated additive injection system.
OIML International Organization of Legal Metrology
product stream A stream consisting of a pure product. Both the main and blend streams
are product streams.
proving run One completed batch or loading operation carried out with the
Automated Proving Mode enabled.
ratio blending A process of loading multiple products into a vessel simultaneously. All
product streams that make up the loading arm have their own dedicated
flow meter, pump, and control valve. Two independently controlled
product streams are blended down-stream of the custody meters.
recipe An entity that describes an end product in terms of its primary products
and additives. It also includes clean line volume for blending and flush
volumes for additive injection.
RIT RIT stands for Remote Interaction Terminal. It is designed to aid the
operator in using the instrument without using the keypad.
The RIT panel has 3 keys per arm: START, STOP and ACK. These are
connected to GP inputs of the instrument. The three indicator lamps
outputs per arm are RED, AMBER and GREEN. These are connected
to GP outputs of the instrument.
service display Two line display that shows the loading information for a selected
parameter for the selected arm.
side stream blending This is a form of ratio blending where a minor product stream is metered
and blended into a main product stream upstream from the main
custody transfer meter.
transaction The record of product movement created once the operator is
authorised to use the instrument. A single transaction can be composed
of multiple batches, each batch representing the individual product
movements that are required to fill the compartments of a vehicle.
unauthorised flow Flow that is recorded by a meter without being authorised (by an
operator pressing the START key button).
unit address The address byte a computer uses to direct information to the desired
instrument
vessel A device for containing product, such as a compartment within a truck
tanker.
wait period The time the computer waits for a response after sending a command to
the instrument. Generally 300 millisecond.
Glossary - 2 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual