Honeywell Enraf 1010 CB Programming Manual page 30

System (2)
GP Input n Options and descriptions are common to GP Inputs 2 to 16.
Input Type The Input type sub-menu of the General Purpose Inputs menu allows
Input Function The Input function sub-menu of the General Purpose Inputs menu
4 - 14
GP Input
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
selection of type of input.
Select one of the following options:

None

Permissive

System Input

Arm Input

RIT Input (Available if RIT panel is enabled)
allows selection of function for that input. Available input functions will
depend on the input type selected.
Select one of the following options for Input Type as Permissive:

Vapour Recovery
Input assigned to monitor the vapour recovery hose park switch.

Overfill/Ground
Input is assigned to monitor a vehicle grounding and overfill system
such as a Scully or Liquip system.

Programmable Permissive
Allows the selection of an additional permissive input and its asso-
ciated messages. The message is defined under the Configure
Messages menu item. See section 4.8.
The Permissive must be active to allow loading to take place.
Model 1010 Application Pack CB
Programming Manual
Terminal
CA21/CA19
CA22/CA19
CA23/CA19
CA25/CA24
CA26/CA24
CA27/CA24
CA28/CA24
CB20/CB19
CB21/CB19
CB22/CB19
CB23/CB19
CB25/CB24
CB26/CB24
CB27/CB24
CB28/CB24
Part No.: 4418024 - Rev. 1