Honeywell Enraf 1010 CB Programming Manual page 93

Authorisation Entry Mode
SCREEN 10-7
SCREEN 10-8
10 - 7
10.3.4 Retrieve an ID
1. From the Authorisation menu, select SEARCH FOR AN ID.
The instrument displays the SELECT TYPE prompt.
2. Select an option.
The instrument displays ENTER INDEX >
3. Enter an index number.
• If the instrument cannot find the index number, it displays the
following:
INDEX: n
TYPE: NONE
ID: nnnn
• If the instrument finds the index number, it displays the number
and type of ID matching the index number.
INDEX: n
TYPE: aaaaaaaaa
ID: nnnn
4. Press the Cancel key to display the main menu.
10.3.5 Edit Master IDs
1. From the Authorisation menu, select EDIT MASTER ID's.
2. If an ID is programmed for the index number currently displayed the
ID number is displayed on the bottom line.
No Personnel ID at Index No. 1
Personnel ID Programmed at Index No. 1
3. Display the required index number by one of the following methods:
• Press Display to increment the index number by one.
• Select an index number using the numeric keys and the Enter
key.
4. Press Enter to edit the currently displayed index number.
One of the following messages is displayed depending on the type
of authorisation media, where 'n' is the index number.
Model 1010 Application Pack CB
Programming Manual
MASTER INDEX> 1 MASTER INDEX> 1
============ ============
MASTER INDEX> 1 MASTER INDEX> 1
00000052C470 00000052C470
Part No.: 4418024 - Rev. 1