Honeywell Enraf 1010 CB Programming Manual page 51

Loading Arms (3)
Minimum Blend Volume The instrument waits for minimum blend volume before triggering the
Slow Flow Alarm If enabled, the instrument will issue an alarm if the arm flow is less than
Low Percentage The instrument triggers the slow flow low alarm if the arm slow flow is
High Percentage The instrument trigger the slow flow high alarm if the arm slow flow
Slow Flow Alarm Delay The instrument waits until the volume reaches SLOW FLOW ALARM
High Flow Alarm If enabled, the instrument will trigger an alarm if the arm high flow is less
Low Percentage The instrument triggers the high flow low alarm if the arm high flow is
High Percentage The instrument triggers the high flow high alarm if the arm high flow is
High Flow Alarm Delay The instrument waits until the volume reaches HIGH FLOW ALARM
5 - 5
blend alarm.
Enter a value in the following range:

0 to 999 (100*)
the low percentage or greater than the high percentage.
Select one of the following options:

ENABLE

DISABLE*
less than LOW PRECENTAGE and the slow flow alarm is enabled.
Enter a value in the following range:

1 to 50.0 (1.0*)
exceeds HIGH PRECENTAGE and the slow flow alarm is enabled.
Enter a value in the following range:

1 to 50.0 (1.0*)
DELAY before triggering the slow flow alarm.
Enter a value in the following range:

10 to 300 (10.0*)
than the low percentage or greater than the high percentage.
Select one of the following options

ENABLE

DISABLE*
less than LOW PRECENTAGE and the high flow alarm is enabled.
Enter a value in the following range: 1 to 50.0 (1.0*)
greater than HIGH PRECENTAGE and the high flow alarm is enabled.
Enter a value in the following range: 1 TO 50.0 (1.0*)
DELAY before triggering high flow alarm.
Enter a value in the following range:

10 to 300 (10.0*)
Model 1010 Application Pack CB
Programming Manual
Part No.: 4418024 - Rev. 1