Honeywell Enraf 1010 CB Programming Manual page 94

Authorisation Entry Mode
SCREEN 10-9
SCREEN 10-10
SCREEN 10-11
SCREEN 10-12
10 - 8
Type = PIN
Authorisation
Authorisation Type = TOUCH KEY
Authorisation Type = RF ID
Authorisation Type = NexWatch
Change the current ID number by one of the following methods:
• Press Cancel to remove the current ID Number.
• Touch the ID media onto the ID reader
5. Press the Enter key to save the currently displayed ID number.
The instrument displays the index number and ID. Return to step 2.
Model 1010 Application Pack CB
Programming Manual
EDIT PIN #N EDIT PIN #N
XXXX XXXX
ENTER TOUCH #N ENTER TOUCH #N
============ ============
ENTER FACILITY & CARD #N ENTER FACILITY & CARD #N
============ ============
ENTER NEXKEY #N ENTER NEXKEY #N
Part No.: 4418024 - Rev. 1