Honeywell Enraf 1010 CB Programming Manual page 34

System (2)
GP Output #n Condition
4 - 18

System Alarm
Output Relay status closes when the instrument is in a system
alarm state.

Instrument Alarm
Output Relay closes when the instrument is in a critical or
instrument alarm state.

Bay Active
Output Relay closes when the Overfill/Grounding Permissive is
active.

Emergency Stop
Output Relay is closed when the instrument has an ESD Status.
If Output type is selected as stream control, one of the following
functions can be assigned to the selected output. This output is then
assigned to any of the available streams.

Pump Demand
Control Output for Product Supply Pump.

Isolation Valve
Control Output for Arm Gantry Isolation Valve.
If Output type is selected as external additive, one of the following
functions can be assigned to the selected output.This output is then
assigned to any of the available arms.

Ext Addtv Pulse
Provides a Pulse per unit volume of product.
If Output type is selected as control valve, one of the following functions
can be assigned to that output. This output is then assigned to any of
the available streams.

DCV INLET/ SLOW FLOW

DCV OUTLET / HIGH FLOW
If Output type is selected as internal additive, one of the following
functions can be assigned to that output. This output is then assigned to
any of the available internal additives.

INT ADDTV PULSE

INT ADDTV PUMP
If output is selected as RIT, one of the following options can be assigned
to that output. This output is then assigned to any of the available arms.

RIT Red

RIT Green

RIT Amber

Normally Open
Normally Open will force the relay output to be open when the
output is not active.
Model 1010 Application Pack CB
Programming Manual
Part No.: 4418024 - Rev. 1