Permissive Messages - Honeywell Enraf 1010 CB Programming Manual

System (2)
Standard Arm Line 1
Line 2
Standard System Line 1
Line 2
Arm Position Line 1
Line 2
Arm Park Line 1
Line 2
Vapor System Line 1
Line 2
Valve Position Line 1
Line 2
Additive Alarm Line 1
Line 2
Permissive Message Use the Permissive Messages sub-menu to either select the standard
4 - 26
available messages for arm and system inputs. This menu also allows
operator to select the permissive message that you wish to configure.
The following table explains the messages for arm and system inputs.
Reconnect
RECONNECT OR
CLEAR ARM INPUT # n
RECONNECT OR
CLEAR PROG'ABLE
INPUT #n
RECONNECT OR
REPOSITION ARM
RECONNECT OR
PARK ARM
RECONNECT OR
CLEARVAPOUR
SYSTEM
RECONNECT OR
REPOSITION VALVE
CLEAR
ADDITIVE ALARM

4.8.5 Permissive Messages

The Permissive Messages sub-menu allows the selection of either the
standard message for that permissive, or a custom message may be
entered.
message for that permissive or enter a custom message.
Select one of the following options:
Model 1010 Application Pack CB
Programming Manual
GP INPUT MESSAGES GP INPUT MESSAGES
- ARM MESSAGES - ARM MESSAGES
1 - DISPLAY CONTRAST 1 - DISPLAY CONTRAST
- PERMISSIVE MESSAGES - PERMISSIVE MESSAGES
- SYSTEM MESSAGES - SYSTEM MESSAGES
PRESS ENTER TO SELECT PRESS ENTER TO SELECT
Restart
ARM INPUT # n
RESTART YES/NO?
PROGRAMMABLE
INPUT #n
RESTART YES/NO?
ARM POSITION
RESTART YES/NO?
ARM PARK
RESTART YES/NO?
VAPOUR SYSTEM
RESTART YES/NO?
VALVE POSITION
RESTART YES/NO?
ADDITIVE ALARM
RESTART YES/NO?
27 27
Error
ARM INPUT # n REMOVED
PRESS ENTER
PROG'ABLE INPUT #n
REMOVED
PRESS ENTER
ARM POSITION FAULT
PRESS ENTER
ARM PARK FAULT
PRESS ENTER
VAPOUR SYSTEM REMOVED
PRESS ENTER
VALVE POSITION FAULT
PRESS ENTER
ADDITIVE ALARM ACTIVE
PRESS ENTER
Part No.: 4418024 - Rev. 1