Manager Messages - Honeywell Enraf 1010 CB Programming Manual

System (2)
Edit Line 2 Use to compose a custom initial message of 20 characters to display on
Selected Permissive Allows each selected permissive to be either enabled or disabled.
Overfill/Ground
Permissive
Vapour Recovery Allows the Vapour Recovery permissive to be either enabled or
Programmable
Permissive
Manager Reset
Message
Contact Manager
Message Edit Line 1
4 - 24
the bottom line of the screen message area.
Constraints: Only if Initial Message = Custom.

Bottom Line
20 character alphanumeric message
Allows the Overfill/Ground permissive to be either enabled or disabled.
Constraints: Only if Initial Message = Selected Permissive, if loading
Select one of the following options:

Enable*

Disable
disabled.
Constraints: Only if Initial Message = Selected Permissive, if loading
Select one of the following options:

Enable*

Disable
Allows the programmable permissive to be either enabled or disabled.
Constraints: Only if Initial Message = Selected Permissive, if loading
Select one of the following options:

Enable*

Disable

4.8.2 Manager Messages

Use the Manager Messages sub-menu to set messages for the
Manager Reset function.
Selects which message is displayed prior to any loading taking place.
Select one of the following options:

Standard* (Contact Manager)

Custom (As entered under edit line)
Use to compose a custom message of 20 to display on the top line of
the screen message area.
Constraints: Only if Manager Reset Message = Custom.

Top Line (20 Character alphanumeric Message)
Model 1010 Application Pack CB
Programming Manual
effect of Overfill/Ground is not none.
effect of Vapour Recovery is not None.
effect of Programmable permissive is not none.
Part No.: 4418024 - Rev. 1